.png){kind=small}
>
>
DK9183A
Feature:
The DK-9183A is a BLE 5.3 Bluetooth low energy® module Powered by Nordic nRF52840 MCU (Microcontroller unit) the core processor designed ARM Cotex M4F inside yet enables high speed LE PHY 2M, 1M and 125k long range protocol, also offers flexibility design option, it qualified Bluetooth, zigbee mesh profile in stack comprehensive 802.15.4 protocol.
The system development kit supported Nordic nRF5 SDK, NCS SDK& Soft Device and Zephyr project to enablement your Bluetooth LE application, the GPIO (general purpose input/output) incorporates: QSPI, SPI, UART, I2C, PWM, ADC, NFC (Near Field Communication, NFC A) and USB 2.0 full speed interfaces for connecting with peripherals and sensors device are available.
Documents
Where to buy
NORDIC
Product INFO
The DK-9183A module build in Bluetooth® Low Energy Technical from the Nordic Semiconductor 52 family are available in exceptionally quality control and short lead time delivery.
Nordic Semiconductor is a Norwegian fabless semiconductor company specializing in wireless communication technology that powers the Internet of Things (IoT).
Technical range was later supplemented by Bluetooth LE, Matter, Thread, Zigbee, 2.4G proprietary, ANT+ and NFC technology.
DK-9177A this module is supported comprehensive application for Bluetooth® 5 Low Energy Module build in high performance of ARM Cotex M4-FPU single-chip controller inside with great application projects and integrated Ipex connector compliant with external antennas.
DK-9181A this module is supported comprehensive application for Bluetooth® 5 Low Energy Module build in high performance of ARM Cotex M4-FPU single-chip controller inside with great application projects and integrated PCB antennas.
DK-9183A this module is supported comprehensive application for Bluetooth® 5 Low Energy Module build in high performance of ARM Cotex M4-FPU single-chip controller inside with great application projects and integrated Chip antenna.
SA-7351A this DK folder shortcut could rapid download development kit user guide of document. To implementation and quick start to setup designer of hardware and firmware system porting from Nordic SDK as well as develop MCU embedded system with function testing and issues debugging in a short time
2.4GHz
Apple Find My
Specification
- nRF52840, ARM ® Cortex ® M4 32-bit processor with FPU, 64 MHz
- 1 MB Flash and 256 kB RAM
- LE 2M PHY, LE 1M PHY, LE Coded PHY (Long Range)
• 2 Mbps, 1 Mbps, 500 kbps, and 125 kbps
• IEEE 802.15.4-2006 – 250 kbps
• Proprietary 2.4 GHz – 2 Mbps, 1 Mbps
- Radio
• GFSK at 1 Mbps and 2 Mbps, QPSK at 250 Kbps
• -95 dBm sensitivity in 1 Mbps Bluetooth ® low energy mode-103 dBm sensitivity in 125 kbps Bluetooth ® low energy mode (long range)
• -20 to +8 dBm TX power, configurable in 4 dB steps
• On-air compatible with nRF52, nRF51, nRF24L, and nRF24AP Series
- Power Management
• 1.7 V to 5.5 V supply voltage range
• 1.8 V to 3.3 V regulated supply
- Security features
• ARM ® TrustZone ® Cryptocell 310 security subsystem
• 128-bit AES/ECB/CCM/AAR co-processor
- Peripheral interface / Hardware
• USB 2.0 full speed (12 Mbps) controller
• QSPI 32 MHz interface
• High-speed 32 MHz SPI
• Type 2 NFC-A tag with wake-on field
• Touch-to-pair support
• Programmable peripheral interconnect (PPI)
• 48 general purpose I/O pins (GPIO)
• EasyDMA automated data transfer between memory and peripherals
• Nordic SoftDevice ready with support for concurrent multiprotocol
• 12-bit, 200 ksps ADC – 8 configurable channels with programmable gain
• 64 level comparator
• 15 level low-power comparator with wake-up from System OFF mode
• Temperature sensor
• 4x4 channel PWM unit with EasyDMA
• Audio peripherals – I2S, digital microphone interface (PDM)
• 5x 32-bit timer with counter mode
• Up to 4x SPI master/3x SPI slave with EasyDMA
• Up to 2x I2 C compatible two-wire master/slave
• 2x UART (CTS/RTS) with EasyDMA
• Quadrature decoder (QDEC)
• 3x real-time counter (RTC)